Ion/Plasma Nitriding Services Performed in Ionitech's Chambers

Ionitech Ltd. has its own plasma nitriding units and provides services of plasma nitriding, plasma nitrocarburising and post-oxidation using our more than 40 years of experience to achieve the best results. Upon client's desire we make metallographic test reports containing information about the process, the surface hardness of the steel, microhardness in depth (diffusion depth) and metallographic studies of the nitrided layer.

Ion (Plasma) Nitriding is a diffusion process of nitrogen into the steel that is used to improve the surface hardness, wear resistance, fatigue life, corrosion resistance of parts made of steel, cast iron, titanium and aluminum alloys, sintered materials, etc.

Plasma nitriding is a heat-treatment with vast technological possibilities, suitable for treating parts with very complex shapes and geometries.

Diffusion layers of desired structure can be obtained, i.e. the diffusion saturation process is controllable and can be optimized to comply with the particular requirements for the layer qualities. The achieved nitride zones are dense and solidly connected with the base metal.

If you have any questions about the process of Plasma Nitriding or if you require a quote, please don't hesitate to ask: office@ionitech.com

Ion (Plasma) Nitriding is a diffusion process of nitrogen into the steel, that is used to improve the surface hardness, wear resistance, fatigue life, corrosion resistance of parts made of steel, cast iron, titanium and aluminum alloys, sintered materials, etc.

Plasma nitriding is a heat-treatment with vast technological possibilities, suitable for treating parts with very complex shapes and geometries.

Diffusion layers of desired structure can be obtained, i.e. the diffusion saturation process is controllable and can be optimized to comply with the particular requirements for the layer qualities. The achieved nitride zones are dense and solidly connected with the base metal.

If you have any questions about the process of Plasma Nitriding or if you require a quote, please don't hesitate to ask: office@ionitech.com

After Plasma Nitriding/Nitrocarburising a following process can be performed in our chambers - Post-Oxidation process. This treatment increases the corrosion resistance of the parts many times and lowers their coefficient of friction.
Post-Oxidation forms a uniform layer on top of the part of about 2-3 microns of thickness (completely magnetite phase - Fe3O4), and gives a black stylish color.

If you have any questions about the process of Plasma Nitriding or if you require a quote, please don't hesitate to ask: office@ionitech.com

Plasma Nitriding is also capable of treating parts of Stainless Steel without the necessity of a pre-depassivation process. The treatment could also be carried out so that it could preserve the corrosion resistance of the steel.
Ionitech has developed a special technology for treatment of all types of stainless steel grades (ferritic, martensitic, austenitic, duplex). PlaSSteel increases the surface hardness and wear resistance of the steel and at the same time completely eliminates the pitting corrosion possibility, to which the stainless steel grades are very susceptible.

If you have any questions about the process of Plasma Nitriding or if you require a quote, please don't hesitate to ask: office@ionitech.com